Product info – (주)도어코코리아 doorcokorea

Product info

THERMAL PERFORMANCE

DoorCo Korea composite doors are thermally efficient by design.

The warm foam core allows the door to have a significantly better ‘U’ value than any other option on the market and our entire range meets with the requirements of the current Building Regulations.

There are various upgrades to the glass options which increase the thermal performance of the door. To find the U-Value of you individual door set, please visit the Buildcheck calculator which contains the current DoorCo® door range.

Our full door range complies with Document L when using as a minimum a standard 3 chamber profile system & low aluminium threshold.

Technical Specifications

44mm Door

· Grained GRP SMC skins are available in a wide variety of styles
and colours including wood stains

· Stiles and Rails are manufactured from a water-resistant polymer

· LVL is used as the main internal reinforcement

· Skins and sub frame are bonded with a Urethane Adhesive Resin

· The door is filled with CFC-Free Polyurethane Foam density
44.5 – 45.5kg/m3

· Superior heat and sound insulation

· Centre Pane Value of approximately 0.44

· Doors have exceeded the requirements of PAS24 of the UK

· UK Q-Marked with full manufacturing traceability

Performance

The door offers a truly appealing entrance for any home, with a high-definition smooth or grained GRP outer skin that will look stunning for years to come. The door offers stability from the elements with its inner core of LVL encased with composite stiles and rails for protection against any water ingress.

The inner core is manufactured from high density polyurethane foam, which offers exceptional thermal efficiency and will help to reduce energy bills in comparison with any other door on the market.

Technical Specifications

44mm Door

· Grained GRP SMC skins are available in a wide variety of styles and colours including wood stains

· Stiles and Rails armanufactured from a water-resistant polymer

· LVL is used as the main internal reinforcement

· Skins and sub frame are bonded with a Urethane Adhesive Resin

· The door is filled with CFC-Free Polyurethane Foam density 44.5 – 45.5kg/m3

· Superior heat and sound insulation

· Centre Pane Value of approximately 0.44

· Doors have exceeded the requirements of PAS24 of the UK

· UK Q-Marked with full manufacturing traceability

Performance

The inner core is manufactured from high density polyurethane foam, which offers exceptional thermal efficiency and will help to reduce energy bills in comparison with any other door on the market.

Care and Maintenance

Your new door should keep safe and secure for years to come however with all products and especially those that are exposed to the elements we recommend that you carry out a care and maintenance routine.

· The door leaf should only be cleaned using war water or non-aggressive composite door wipes. No solvent- based product or abrasives should be used as
these will damage the surface of the skin.

· External glass should be cleaned with warm soapy water and cleaned with a proprietary glass cleaner.

· Hardware can be cleaned with a mild detergent and wiped clean. No harsh chemicals or abrasives should be used.

· Maintenance of the door may be required to maintain any guarantees from the installer. Hinges should be lubricated with engineering oil. Cylinders can be lubricated with Teflon-based products only, as other oils may cause degradation.

· If necessary, a small amount of lubricant can be applied to the moving parts such as letterplates, handles and knockers.

Care and Maintenance

· The door leaf should only be cleaned using war water or non-aggressive composite door wipes. No solvent- based product or abrasives should be used as these wildamage the surface of the skin.

· External glass should be cleaned with warm soapy water and cleaned with a proprietary glass cleaner.

· Hardware can be cleaned with a mild detergent and wiped clean. No harsh chemicals or abrasives should be used.

· If necessary, a small amount of lubricant can be applied to the moving parts such as letterplates, handles and knockers.